Best NDT Company in Coimbatore

Non Destructive Testing is a smart quality control method that is done the components at various stages, on raw materials, after machining and after some period of service.

What does this NDT company do?

Non Destructing Testing is a little investment which saves a huge amount of money to the manufacturers by avoiding rejection of components due to casting or raw material defects.
It is also essential to do NDT after few processing such as welding & heat treatment , as there are possibilities of metal failure due to heat involved in the process.
The below are the three stages when NDT shall be involved;
  • Raw material NDT- Casted, formed, Forged or extruded
  • During Processing- Welding NDT, Machining or Heat Treatment
  • After Service – During service /during maintenance checkup
It is essential to involve best NDT Inspection Service Company on the job and well experienced and knowledged NDT Technicians for the job. Since the Non Destructive testing is mostly operator based, any false interpretation will lead to disaster.

Non Destructive Testing

We Advanced Quality Centre are built with experts in the field. We assure you best NDT  Services anywhere in south India, visit https://aqcinspection.com/ to know more about us.

We offer NDT Inspection Services on methods of Ultrasonic Testing, Liquid Penetrant Testing, Magnetic Particle Inspection, Weld Visual Inspection, Radiography Testing / X ray , Digital Radiography Testing, Positive Material Identification.

Also we are reliable Material Testing / Mechanical Testing Company and we do quality testings such as Chemical Analysis, Tensile Tests, Bend Tests, Macro Tests, Micro analysis, impact Tests, Hardness Tests and Corrosion analysis.
We are experts on creating a perfect Welding Procedure Specification  WPS and approval Welder Qualification Certificates-  Welder certificate

We are experts in doing Painting inspections and train industrial painting applicators and qc team the painting inspection techniques, we shall make assessments on painters or paint applicators.

For Industrial NDT training and ASNT Level II certification for employees for Digital Radiography Testing, Radiography Testing ASNT Level II, Ultrasonic Testing Level II , Fluoresent Penetrant Testing or Visible Liquid Penetrant Testing ,Magnetic Particle Testing ASNT Level II certification Visit us or write us.

Wanted to know more  on our updates visit https://advancedqualitycentre.blogspot.com/

or https://ndtcenter.blogspot.com/

Comments

Post a Comment

Popular posts from this blog

Discontinuities in Ultrasonic Testing in NDT

Image
 This blog will discuss types of discontinuities that can be evaluated with the ultrasonic testing in NDT method. Discontinuities can be divided into three general categories inherent, processing and service Inherent discontinuities are usually formed when the metal is molten. Inherent wrought discontinuities relate to the melting and solidification of the original ingot before it is formed into slabs, blooms and billets. Inherent cast discontinuities relates to the melting, casting and solidification of a cast article. Usually caused by inherent variables such as inadequate feeding, gating, excessive pouring temperature or entrapped gases. Processing discontinuities are usually related to the various manufacturing process such as machining, forming, extruding, rolling, welding, heat treating and plating. Service discontinuities are related to the various service conditions such as stress, corrosion, fatigue and erosion. During the manufacturing process, many disco
Read more

NDT on Shafts

Image
  Non Destructive Testing,NDT on Shafts is considered essential , because the shafts are mostly made as load bearing structures, any defects such as cracks will propagate more during acting of load and eventually will cause failure. The most possible defects in shafts are Cracks and Pipes , which is shown below The Non Destructive methods preferred for defect detection on raw material shafts are Ultrasonic Testing, Magnetic Particle testing / Eddy Current Testing / Magnetic Flux Leakage method. We have not discussed about other NDT methods such as Liquid Penetrant testing & Radiographic testing because for raw material inspection. These methods will be cost effective for raw material testing  ( i.e. most costly and labor intensive, also there is possibility of missing out the cracks in radiography testing due to orientation of crack ) The Defect wise identification method is given as below  , Internal Defect ( Piping ) – Ultrasonic Testing Surface Defects  (C racks) – Magnetic Part
Read more

Standards for Welding Positions

Image
  Standards for Welding Positions : It is very important for the Weld Inspector  to know the position , or location of a joint relative to the horizon, because it may determine what welding process, methods, and techniques can be used. Welding is usually easiest when the welder can work on a joint located on a flat, horizontal surface, such as on a table or bench. However, joints in the field may be located in a variety of positions relative to the welder and to the horizon, as shown below.  1)  Welding positions – AWS D1.1, European Welding Standard EN 287 – 1, ASME IX: 2) Welding Positions – Butt, Fillet and Piping Welds: Flat Butt Weld Position – 1G In this position, the axis line of the weld must  not incline more than 15°  from the horizon and the face of the weld must be on top. Welders often refer to the flat-position welding by the nonstandard term  downhand welding. Horizontal Butt Weld Position – 2G In this position, both plates are perpendicular to the bench top, but the axi
Read more