Radiography Testing or X –Ray Testing Services

Radiography Testing is a volumetric defect detection method, the NDT method can identify any defects in any material and any locations. How are these Radiography Testing services used in NDT inspections?
RT Inspection

Difference between RT Radiography and X ray

Radiography testing uses Gamma ray as a radiation source and it does not require any electrical power source for inspection, X ray uses radiation emitted from an electrical device and it can be switched ON and OFF.
Both Gamma rays and X-rays are electromagnetic radiation and are similar.
Advanced Quality Centre offers India’s best NDT Inspection Service and we are the most trusted and reliable Radiography testing company, we provide RT Inspection Service, both Gamma Radiography and X ray.
We use IR-192 and CO-60 Source for Gamma Radiography.

X ray on Aluminium Casting and Die Casting.

We do industrial radiography for Aluminium components using X ray and Gamma Ray , Pressure die casting components with complex structure can be easily and rapidly inspected using X-ray.

Digital Radiography

Digital Radiography machine with X ray power source of upto 350 kV is used for inspection on non-metal, plastic, Composites, aluminium and low thickness steel parts.

What is Difference between film Radiography and Digital Radiography?

Film radiography is more time consuming – Digital Radiography is quick process and result can be viewed live
Film radiography needs high skilled labors –  Digital Radiography does not required skilled workers
Film radiography is costly for each shot – Digital radiography is much cheaper comparatively
Images are obtained in a Film – Images are obtained as digital pictures which can be saved electronically.

Cost for Radiography Testing:

Price for Radiography testing is generally mentioned in cost per square inch (rate / sq.inch).
The square inch of the X ray film used for inspection is considered for calculation, generally X ray film is cut only in standard sizes such as 3×4, 4×6, 4×8, 4×12, 4×16, 8×8,  8x 6 or 16×16.
For best price for radiography testing  visit https://aqcinspection.com/  or call 04224342244, 9489342244, 8668082413
Also we train you for carrying out training for digital radiography testing, Digital x ray, radiography testing – RT Inspection and certify with ASNT level  II certifications.
For Radiography Testing services / X ray of Tanks, pressure vessels, pipe lines or castings at any location in Southern India call us or visit us at https://aqcinspection.com/non-destructive-testing/
To get updates on our other NDT services visit our blogspot at https://ndtcenter.blogspot.com

Comments

Post a Comment

Popular posts from this blog

Discontinuities in Ultrasonic Testing in NDT

Image
 This blog will discuss types of discontinuities that can be evaluated with the ultrasonic testing in NDT method. Discontinuities can be divided into three general categories inherent, processing and service Inherent discontinuities are usually formed when the metal is molten. Inherent wrought discontinuities relate to the melting and solidification of the original ingot before it is formed into slabs, blooms and billets. Inherent cast discontinuities relates to the melting, casting and solidification of a cast article. Usually caused by inherent variables such as inadequate feeding, gating, excessive pouring temperature or entrapped gases. Processing discontinuities are usually related to the various manufacturing process such as machining, forming, extruding, rolling, welding, heat treating and plating. Service discontinuities are related to the various service conditions such as stress, corrosion, fatigue and erosion. During the manufacturing process, many disco
Read more

NDT on Shafts

Image
  Non Destructive Testing,NDT on Shafts is considered essential , because the shafts are mostly made as load bearing structures, any defects such as cracks will propagate more during acting of load and eventually will cause failure. The most possible defects in shafts are Cracks and Pipes , which is shown below The Non Destructive methods preferred for defect detection on raw material shafts are Ultrasonic Testing, Magnetic Particle testing / Eddy Current Testing / Magnetic Flux Leakage method. We have not discussed about other NDT methods such as Liquid Penetrant testing & Radiographic testing because for raw material inspection. These methods will be cost effective for raw material testing  ( i.e. most costly and labor intensive, also there is possibility of missing out the cracks in radiography testing due to orientation of crack ) The Defect wise identification method is given as below  , Internal Defect ( Piping ) – Ultrasonic Testing Surface Defects  (C racks) – Magnetic Part
Read more

Standards for Welding Positions

Image
  Standards for Welding Positions : It is very important for the Weld Inspector  to know the position , or location of a joint relative to the horizon, because it may determine what welding process, methods, and techniques can be used. Welding is usually easiest when the welder can work on a joint located on a flat, horizontal surface, such as on a table or bench. However, joints in the field may be located in a variety of positions relative to the welder and to the horizon, as shown below.  1)  Welding positions – AWS D1.1, European Welding Standard EN 287 – 1, ASME IX: 2) Welding Positions – Butt, Fillet and Piping Welds: Flat Butt Weld Position – 1G In this position, the axis line of the weld must  not incline more than 15°  from the horizon and the face of the weld must be on top. Welders often refer to the flat-position welding by the nonstandard term  downhand welding. Horizontal Butt Weld Position – 2G In this position, both plates are perpendicular to the bench top, but the axi
Read more