Inspection of Automobile Components



Inspection of Automobile Components

Automobile components manufacturing companies requires high quality standards and quality management  systems (QMS), to deliver high performance machines at low cost, they have to reduce cost of quality (COQ) by implementing various quality control tools such as Ishikawa, Six Sigma, %s and much more.


How are NDT services used  in automobile components?

In order to reduce the rejection of machined components due to raw material defects such as Shrinkage, blow holes, inclusions, cracks, etc., It is best to identify the defects at time of raw material purchase,  we offer our Non-destructive Testing  NDT services at supplier end or company storage yard, the various NDT method we offer are as follows

·         Ultrasonic Testing UT – for finding Internal defects
·         Magnetic Particle Testing MPT – for finding surface & near surface defects in Ferro magnetic material (the materials which has major content as Ferrous, Nickel and Cobalt)
·         Liquid Penetrant Testing  PT – for finding surface defects such as cracks and pores on any materials
·         Radiographic Testing RT – For Finding any volumetric defects
·         Visual Testing VT- for visual & dimensional inspection on welds and castings
·         Eddy Current Testing ET- For finding surface defects on conductive materials
·         Positive Material Identification PMI- for grade segregation 

We inspect the your material with appropriate NDT methods for your suitable quality level and save you a huge amount of money by ensuring your procurement, machining , processing & transportation costs ,
We assure  you quality NDT services in Coimbatore & trust by involving high experienced inspectors with global certifications operating advanced machines , visit us @ https://aqcinspection.com/contact/ or call 0422 4342244, 9489342244, 8668082413, Also various mechanical tests are made to analyze the mechanical properties and chemical contents of the material, the various inspections are as below
  •           Chemical Analysis , Spectroscopy
  •          Tensile Strength, Elongation property
  •          Bend Test
  •         Impact Test
  •          Hardness Tests
  •          Micro Analysis
  •          Macro Analysis

Feel free to contact us for support.

Comments

Post a Comment

Popular posts from this blog

Discontinuities in Ultrasonic Testing in NDT

Image
 This blog will discuss types of discontinuities that can be evaluated with the ultrasonic testing in NDT method. Discontinuities can be divided into three general categories inherent, processing and service Inherent discontinuities are usually formed when the metal is molten. Inherent wrought discontinuities relate to the melting and solidification of the original ingot before it is formed into slabs, blooms and billets. Inherent cast discontinuities relates to the melting, casting and solidification of a cast article. Usually caused by inherent variables such as inadequate feeding, gating, excessive pouring temperature or entrapped gases. Processing discontinuities are usually related to the various manufacturing process such as machining, forming, extruding, rolling, welding, heat treating and plating. Service discontinuities are related to the various service conditions such as stress, corrosion, fatigue and erosion. During the manufacturing process, many disco
Read more

NDT on Shafts

Image
  Non Destructive Testing,NDT on Shafts is considered essential , because the shafts are mostly made as load bearing structures, any defects such as cracks will propagate more during acting of load and eventually will cause failure. The most possible defects in shafts are Cracks and Pipes , which is shown below The Non Destructive methods preferred for defect detection on raw material shafts are Ultrasonic Testing, Magnetic Particle testing / Eddy Current Testing / Magnetic Flux Leakage method. We have not discussed about other NDT methods such as Liquid Penetrant testing & Radiographic testing because for raw material inspection. These methods will be cost effective for raw material testing  ( i.e. most costly and labor intensive, also there is possibility of missing out the cracks in radiography testing due to orientation of crack ) The Defect wise identification method is given as below  , Internal Defect ( Piping ) – Ultrasonic Testing Surface Defects  (C racks) – Magnetic Part
Read more

Standards for Welding Positions

Image
  Standards for Welding Positions : It is very important for the Weld Inspector  to know the position , or location of a joint relative to the horizon, because it may determine what welding process, methods, and techniques can be used. Welding is usually easiest when the welder can work on a joint located on a flat, horizontal surface, such as on a table or bench. However, joints in the field may be located in a variety of positions relative to the welder and to the horizon, as shown below.  1)  Welding positions – AWS D1.1, European Welding Standard EN 287 – 1, ASME IX: 2) Welding Positions – Butt, Fillet and Piping Welds: Flat Butt Weld Position – 1G In this position, the axis line of the weld must  not incline more than 15°  from the horizon and the face of the weld must be on top. Welders often refer to the flat-position welding by the nonstandard term  downhand welding. Horizontal Butt Weld Position – 2G In this position, both plates are perpendicular to the bench top, but the axi
Read more